Hydraulic cylinder repair with a technical report
We don't swap parts blindly. Before repairing, we disassemble, measure and find out why the cylinder failed. You get a technical report with the root cause, so the problem is solved for good and the downtime doesn't repeat.
Request a repair by e-mailcomercial2@incocil.com.br · We serve all of Brazil and export. Cylinders of any manufacturer.
The technical report: what sets our repair apart
Every cylinder we receive goes through controlled disassembly, dimensional inspection and part analysis. The result is a technical report documenting the condition of the equipment and the origin of the failure.
Root cause of the failure
We identify the real reason for the defect: oil contamination, misalignment, pressure spikes, seal wear, corrosion or application error. Not just the symptom.
Measurements and tolerances
Rod, barrel, piston and guides measured and compared against design tolerances, supported by our metrology.
Photo record
Photos of the damaged parts so you understand what happened and can share it with maintenance and engineering.
Clear recommendation
Rebuild, replace or resize: we indicate the best cost-benefit path and how to prevent recurrence.
How it works
- 1
You send us the request
E-mail photos, the observed defect and the cylinder data. If possible, tell us the application.
- 2
Receiving and identification
The cylinder is registered, identified and tracked at every stage of the process.
- 3
Disassembly and report
Full inspection, measurements and root-cause analysis. You receive the report and the quote.
- 4
Rebuild
Barrel honing, hard chrome or rod replacement, new pistons, guides and seals, with robotic welding when needed.
- 5
Test and delivery
Pressure and sealing test, painting and shipping. INCOCIL warranty applies.
What we repair
- Leaks at rod, piston or head
- Scored, dented or chrome-damaged rods
- Worn or scored barrels, recovered by honing
- Damaged eyes and joints (robotic welding)
- Telescopic, master-slave and cushioned cylinders
- Imported cylinders and any brand
Frequently asked questions
What is the repair technical report?
It's the report we produce after disassembling and measuring the cylinder. It records the condition of each component, points out the root cause of the failure and recommends the corrective action, so you fix the problem and not just the symptom.
Is the report charged separately?
Ask for the conditions in your request. Send an e-mail with the cylinder data and our sales team replies with the details and lead time.
Do you repair other brands?
Yes. We rebuild cylinders from any manufacturer, including imported ones, and make custom parts when no spares are available.
How long does it take?
It depends on size and damage. Lead time is given with the quote, after the report. For machine downtime, say so in the e-mail and we prioritize the analysis.
Does the repaired cylinder have a warranty?
Yes. The service goes through the same pressure and sealing tests as a new cylinder, with INCOCIL warranty.
Cylinder down? Talk to us
Send photos and the cylinder data. Our sales team replies with the next steps.
comercial2@incocil.com.br